Adda Flagpoles design Some of the other manufacturers
Always remember the cheapest or even the dearest flagpole is not necessarily the best value for money
[ About Adda ] [ Flagpoles ] [ Installation Tips ] [ Current Installations ] [ Contact Us ] [ FAQ ] [ portable goal posts.] [ Goal posts ] [Rotating Banner Arms]
9 M poles are installed in the same way as their 6 M
9 M poles have a steel spigot with a diameter of 76 mm and may not be hot dipped galvanized.
Two piece main shaft glued together.
12 mm zinc coated threaded bar on 150 mm centres
200 mm sq 10 mm thick
Plastic
120 mm OD with a 2 mm wall thickness
100 mm OD with a 1.2 mm wall thickness
Nylon VB cord suitable for indoor use only
Sand filled canvas tube
6 M tapered pole has a base plate with 4 foundation bolts cast into a concrete footing with a minimum of 4x 40 Kgs bags of concrete.
9 M tapered poles are installed in the same way as our 6 M but with a minimum of 5 bags of concrete.
9 M poles have a galvanized steel spigot inside the pole with a minimum diameter of 88.9 mm.
Main shaft is machine tapered single piece.
The foundation bolts for a 9 M pole are 16 mm galvanized steel L bolts on 200 mm centres
Base plates for 9 M poles are 280mm sq 16 mm thick
Flagpole trucks or tops are cast aluminium
Main shaft for 12 M 127mm OD with a 3mm wall thickness
9 M pole have a 100.3 mm OD shaft with a 2.3 mm wall thickness
Minimum halyard rope is 6 mm silver rope
Vandal resistant weighted sling have a stainless steel wire through the centre for strength and security with a U/V stabilized cover over the lead weights